Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Sustainability Label

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

NEW COLOUR!

Comfortable, flexible and durable 4-way stretch. Good washing abilities. The fibre is partially bio-based, which contributes to reducing the climate footprint

Light fabric with a good stretch function for comfort in warm climates.

Light fabric for comfort in warm climate.

Lighter cotton quality with stretch. Provides comfort, protects against dirt and splashes and provides good mobility in the garment. Suits well in industry and service.

Lightweight 4-waystretch that is both comfortable and durable.

Lighter quality with stretch that protects against dirt and splash while retaining the mobility of the garment. Suitable for industry and service. Keeps color and shape.

High-visibility trousers made of soft and supple 4-way stretch fabric that delivers ultimate comfort and ensures you’re seen when it matters most. The trousers feature segmented reflective strips. Kneepad pockets offer protection and comfort when working on your knees. 
Prepared with attachments for CORDURA® tool pockets (art. 2170), sold separately.

Hi-Vis Trousers 4-Way Stretch

Built for pace and visibility. The main fabric is a comfortable, flexible and durable 4-way stretch that delivers all-day comfort, while ventilating mesh panels at the knees and yoke help you keep the right temperature when work ramps up. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. ToolRig™ tool pockets and a hammer holder bracket are included, and they are detachable, which is ideal when switching tasks. For heavier rigs, the trousers feature loops for ToolRig™ braces/harness for better ergonomics and load management. 
Knee work stays comfortable and secure with kneepad pockets in reinforced CORDURA® stretch. Storage is generous with extra-wide tool pockets, CORDURA® reinforcements where wear is highest and a raised back waist that keeps you covered in motion. Segmented reflective tape makes sure you are seen when it matters most.
<ul>
<li>Comfortable, flexible and durable 4-way stretch</li>
<li>Ventilating mesh panels at knees and yoke</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>ToolRig™ tool pockets and hammer holder bracket included</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Kneepad pockets in reinforced CORDURA® stretch</li>
<li>Raised back waist</li>
<li>CORDURA®-reinforced tool pockets</li>
<li>Segmented reflective tape</li>
</ul>

Blåkläder ToolRig™ Hi-Vis Trousers 4-Way Stretch

Industrial and service trousers in lightweight 2-way stretch, made from a cool, durable and flexible fabric that blends polyester, cotton and elastomultiester – a stretch fibre that withstands higher washing temperatures while providing enhanced comfort throughout the working day. 
The trousers feature pre-bent legs for optimal comfort and are completely scratch and metal-free, making them particularly well-suited for industrial environments with strict safety requirements. Suitable for industrial laundering.
Also available in women's model 7011.

Trousers Stretch

Modern transport and service trousers in lightweight 2-way stretch, made from a cool, durable and flexible fabric with quick-drying properties – ideal for working indoors or outdoors in warmer weather. 
The trousers feature pre-bent legs for optimal comfort and reflective details at the leg ends for increased visibility. 
For maximum freedom of movement, 4-way stretch panels are placed at the seat, knees and crotch. Practical, bellows-style pockets on both legs provide space for all your essentials.

Service Trousers Stretch

Built for indoor environments and mobile work. The main fabric is a light 2-way stretch that breathes and stays comfortable as temperatures rise, while 4-way stretch panels at seat, knees and crotch follow every move without holding you back. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. This service trouser is delivered without tool pockets, so add ToolRig™ tool pockets and ToolRig™ Sliders if you want to build your own rig. 
Details are tuned for workflow, including a pen and knife pocket designed for both right- and left-handed users, and a leg pocket with internal mesh phone pocket that keeps the mobile secure and easy to reach. Pre-shaped knees for increased mobility and comfort during kneeling work.
<ul>
<li>Light 2-way stretch for comfort in warm environments</li>
<li>4-way stretch panels at seat, knees and crotch for extra mobility</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>Add ToolRig™ tool pockets if needed</li>
<li>Pen and knife pocket for right- and left-handed users</li>
<li>Leg pocket with internal mesh phone pocket</li>
<li>Pre-shaped knees for increased mobility and comfort</li>
</ul>

Blåkläder ToolRig™ Service Trousers Stretch

Modern service trousers in a lightweight but durable material with quick-drying properties – making the trousers perfect for working indoors or outdoors in warmer weather. The model has a slimmer fit and pre-bent knees for increased comfort. 
For optimal mobility the trousers have stretch panels in carefully selected places such as the seat, knees and crotch. The trousers have a pen and knife pocket adapted for left and right-handers and a leg pocket with mesh inner pocket for a phone, and the leg ends can be extended.

Service Trousers with Stretch

Work close to materials, machinery and finished surfaces without worry. These industrial trousers are made in 2-way stretch that delivers comfort, mobility and protection from dirt and splashes. A scratch-free construction with concealed buttons and zips means you do not damage sensitive surfaces. 
The trousers are tested to EN ISO 15797 and suitable for industrial laundering, so they handle tough daily routines again and again. Pre-shaped knees for increased mobility and comfort during kneeling work, kneepad pockets for protection, and fixed tool pockets keep order. An elasticated waist boosts comfort. A reflective detail on the legs adds visibility when the light drops.
<ul>
<li>Cotton canvas with 2-way stretch for comfort, mobility and protection from dirt and splashes</li>
<li>Scratch-free design with concealed buttons and zips</li>
<li>Elasticated waist</li>
<li>Tested for industrial laundering to EN ISO 15797</li>
<li>Pre-shaped knees for increased mobility and comfort during kneeling work</li>
<li>Kneepad pockets</li>
<li>Fixed tool pockets</li>
<li>Reflective detail on the legs</li>
</ul>

Industrial Trousers Stretch

Craftsman trousers in a slightly thinner 4-way stretch material that delivers the ultimate comfort. The trousers have a narrower fit and a tighter look. 
Bottom-opening knee pad pockets with CORDURA® stretch, detachable holster pockets, bellowed back pockets, ruler pocket and loop for hammer holder on both left and right sides.

Craftsman trousers 4-way Stretch

Move freely, work hard, look sharp. These craftsmen’s trousers combine 4-way stretch with strategic CORDURA® reinforcements for speed and precision day in, day out. 
Kneepad pockets in CORDURA® stretch with bottom opening make knee work smooth, while bellows back pockets, a ruler pocket and hammer-holder loops on both sides keep things organised without bulk. Discrete black reflective details add visibility when you need it. In short, flexible comfort, a clean look and durability where it matters.
<ul>
<li>Light 4-way stretch for high comfort and easy mobility</li>
<li>Kneepad pockets in CORDURA® stretch with bottom opening</li>
<li>Bellows back pockets, ruler pocket, hammer-holder loop on both sides</li>
<li>Black reflective details on the legs</li>
</ul>

Craftsman Trousers 4-way Stretch

When comfort is priority one and durability still has to deliver. These craftsmen’s trousers use 4-way stretch that follows every move and keeps the pace high all day. Everyday details make a difference, including kneepad pockets in reinforced CORDURA® stretch with bottom opening, roomy bellows back pockets and a ruler pocket built for real use. Reinforced pocket openings and hems, and reflective details on the legs add discreet visibility. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. ToolRig™ tool pockets and a hammer holder bracket are included. For stable ergonomic load distribution when you add more kit, there are loops for ToolRig™ braces/harness for better ergonomics and load management.
<ul>
<li>4-way stretch for high comfort and mobility</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>ToolRig™ tool pockets and hammer holder bracket included</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Kneepad pockets in CORDURA® stretch with bottom opening</li>
<li>Reinforcements at pockets and leg hems</li>
<li>Reflective details on the legs</li>
</ul>

Blåkläder ToolRig™ Craftsman Trousers 4-way Stretch

Comfortable, lightweight craftsman trousers in a thinner 2-way stretch material and with panels in 4-way stretch that really deliver the ultimate comfort where it’s needed most. 
The trousers have fixed tool pockets, bottom-fed knee protector pockets with CORDURA®-stretch, practical pockets with reinforcement, ruler pocket, front pockets and loop for hammer holder on both the left and right sides. 
Also available in a women’s model 7132. 
<ul>
<li>2-way stretch for excellent comfort</li>
<li>4-way stretch panels</li>
<li>CORDURA® stretch-reinforced knee pad pockets</li>
</ul>

Craftsman trousers with stretch

Comfortable, lightweight craftsman trousers in a thinner 2-way stretch material and with panels in 4-way stretch that really deliver the ultimate comfort where it’s needed most. 
The trousers have bottom-fed knee protector pockets with CORDURA® stretch, practical pockets with reinforcement, ruler pocket, front pockets and loop for hammer holder on both the left and right sides.

Comfortable, lightweight craftsman shorts in a thinner 2-way stretch material and with panels in 4-way stretch that really deliver the ultimate comfort where it’s needed most. 
The shorts have tool pockets, practical pockets with reinforcement, ruler pocket, front pockets and loop for hammer holder on both the left and right sides. 
Also available in a women’s model 7133.

Craftsman shorts stretch

Comfortable, lightweight craftsman shorts in a thinner 2-way stretch material and with panels in 4-way stretch that really deliver the ultimate comfort where it’s needed most. 
Practical leg pockets with reinforcement, ruler pocket and loop for hammer holder on both left and right sides.

Comfortable, lightweight pirate trousers in a thinner 2-way stretch material and with panels in 4-way stretch that really deliver the ultimate comfort where it’s needed most. 
Bottom-fed knee protector pockets with CORDURA® stretch, practical leg pockets with reinforcement, ruler pocket, and loop for hammer holder on both the left and right sides.

Hi-Vis Trousers 4-Way Stretch

Blåkläder ToolRig™ Hi-Vis Trousers 4-Way Stretch

Trousers Stretch

Service Trousers Stretch

Blåkläder ToolRig™ Service Trousers Stretch

Service Trousers with Stretch

Industrial Trousers Stretch

Craftsman trousers 4-way Stretch

Craftsman Trousers 4-way Stretch

Blåkläder ToolRig™ Craftsman Trousers 4-way Stretch

Craftsman trousers with stretch

Craftsman trousers with stretch

Craftsman shorts stretch

Craftsman shorts stretch

Craftsman pirate shorts stretch